My Cart: 0 item(s)
Used for attaching brackets and mounts to Victory4x4 roof racks
- Kit includes 4 nuts and 4 bolts
Looking for answers to common questions about us or our products? See our FAQ here.
2 Questions asked on T-Slot Nut and Bolt Kit
•
Ask us anything
Q
Steve Barber • 04/30/2023, 4:07:52 PM
What size thread are the bolts /inserts? Are they corrosion resistant? Thanks!
A
05/01/2023, 12:03:22 PM
They are 1/4" and stainless steel.
Q
Derian • 05/23/2024, 8:31:59 PM
what is the width and length of the t-slot nut?
A
07/11/2024, 2:47:04 PM
The nut is 1" long and about 7/16" wide.
0
0
0
0
1
Josh
(GA) | September 2nd, 2020
This is the first ever JCR part that I've given a clearly negative review but for good reason. The bolts are too short, basically unusable. They will work if you are mounting something paper thin but if you try to mount anything thicker like a 1/4" or 3/16" thickness then the bolts will "appear" to work but are NOT safe. What I mean is they will thread in but they will only catch 1 or 2 threads. You only get about a turn or turn and a half out of them. I believe they are 1/4"-20 so you can easily use the base plates with a longer bolt from hardware store. This is worrisome for people who arent real competent in the shop. I can see Joe Schmoe following the directions thinking hes good then having his hi-lift jack or rooftop tent come flying off the first time he stops hard. Just be smart about using these. Other than length, the bases work perfectly in the slotted rails.
Note From JcrOffroad: Thanks for the review. These bolts are designed for the accessories we well, which are .120 to .188 thick. Any thicker plates would need longer hardware. Sorry for any confusion.
