My Cart: 0 item(s)
Designed to maximize the storage space by utilizing the tailgate. Offers customizable mounting for gear. Comes coated with a 2 stage satin textured black powdercoat over durable zinc primer finish.
- Fully Bolt-on, no drill installation.
- Quiet, no rattle cargo solution.
- 14 gauge steel construction.
- Fits 2 door or 4 door Broncos.
Weight Capacity
Table (folded down): 60lbs
Molle Panel (folded up): 25lbs
Looking for answers to common questions about us or our products? See our FAQ here.
11 Questions asked on Bronco Tailgate Table
•
Ask us anything
Q
John Herder • 12/21/2021, 4:50:30 PM
Do you ship to Canada?
A
12/22/2021, 1:25:00 PM
Yes, we do.
Q
Jeff Lambert • 12/21/2021, 4:55:37 PM
Dimensions of the table folded on the panel and once it's unfolded?
A
12/22/2021, 4:12:13 PM
The MOLLE panel is roughly 27" x 11.75" and the table surface is roughly the same. The assembly sticks off the surface of the tailgate roughly 1.5" when folded.
Q
Ross Sanford • 03/06/2022, 9:48:22 AM
Can the table be installed with Ford's slide-out tailgate?
A
03/08/2022, 9:15:53 AM
Yes it can.
Q
Erik Goldberg • 03/28/2022, 5:02:23 PM
Hello
Can this table be used for bags to hang from the table?
A
03/29/2022, 11:24:34 AM
There are no hooks built in, but one could easily be mounted to the MOLLE portion of the table.
Q
Kenzie King • 03/29/2022, 11:50:15 AM
Will this work on a 2022 Ford Bronco?
A
03/30/2022, 9:49:01 AM
Yes, it will.
Q
Jason • 04/12/2022, 10:13:47 PM
Can this be installed with the Ford rear hinged top enclosure?
A
04/26/2022, 5:45:47 PM
Yes it does.
Q
Scott G. • 05/19/2022, 5:52:08 PM
Problems with the final step: tabletop installation - are the 3 tabs actually supposed to fit into the 3 slots in back? Mine aren’t anywhere close to fitting in there…
A
05/20/2022, 2:22:37 PM
They are going to be very tight to prevent any rattle. If you are still having issues give the tech guys a call or email and they can help you out!
269-353-1184
info@jcroffroad.com
Q
Paige Adams • 05/26/2022, 6:19:53 PM
I want to replace the Ford ORM table with this one. Will it completely cover (hide) the holes left from that table?
A
06/09/2022, 2:54:02 PM
It was not really designed with that in mind, but it should cover most of them.
Q
Jesse G. • 06/10/2022, 10:20:16 AM
Will this work with Ford's Fixed Lid cargo area enclosure? (https://accessories.ford.com/products/bronco-2dr-2021-fixed-lid-cargo-area-enclosure-1)
Thanks!
A
06/14/2022, 11:34:44 AM
Yes it will
Q
Brian Brunow • 08/23/2022, 7:40:35 PM
Where do you get and what brand are the rubber axe holders you have in Folding table photos?
A
08/24/2022, 1:18:27 PM
They are called Quick Fist clamps.
Q
Rick • 02/25/2024, 4:38:06 PM
Is this table made from steel? (I am looking for something that will hold a magnetic work light or etc.)
A
02/28/2024, 11:03:26 AM
Yes, its constructed out of 14ga steel.
9
0
0
0
0
Scott
(Boise, Idaho) | August 28th, 2024
This has made for a nice addition to my Bronco adding a high quality **QUIET!!**metal table and molle panel. I highly recommend having the installation video handy as well as some Loctite for the final mounting screws. Just follow the step by step instructions on the video and you will be fine. The final step of adding the flat tabletop can be a bit frustrating but the video helped with that as well.
This is the second part I have purchased from JCR and I am thrilled with the quality of workmanship.
Nat
(Knoxville) | November 27th, 2023
I now have roughly 35,000 miles on my Bronco, and this table has been installed for at least half of that. I have the Ford molly bags attached to it to hold things. At this point, it about the only thing in the back of my Ford that DOES NOT RATTLE. Durability is amazing, it truly is handy, looks good, and have I mentioned its silent existance? Top notch as expected from JCR.
Note From JcrOffroad: Thanks for the review Nat!
Perturbed Max
(WA) | August 8th, 2023
This replaced a noisy pos table from the big river store. Arrived in just a couple days, install took a little time but was fairly easy. It’s a bunch of steps but the directions are well done and easy to follow. This table is rock solid and doesn’t squeak at all empty or loaded up with gear. I’m very happy with it and will buy from JCR again.
Aaron Young
(Alpena Mi) | June 2nd, 2023
Product arrived well packaged, but did not include hot dogs. Installation was a breeze, even for a Jeep guy who normally only takes things apart.
Note From JcrOffroad: Huh, something must have eaten the hot dogs out of the package.
Paulo C
(WA) | July 20th, 2022
Decided on this table over a couple others out there for the Bronco. In the end, its well built, works great and gets top scores for value and quality compared to what else is out there....plus NO DRILLING!! I'd buy it again.
David
| May 14th, 2022
This is a great table. I was looking at the other options out there, but ultimately the simple design and organizing grid on front. I followed the youtube video exactly and it was really helpful in getting everything installed. My only advice is to make sure you have threadlocker before you start, that will be very helpful!
Todd R
(Pennsylvania) | March 16th, 2022
The table is a bit tricky to install but totally worth it. The table itself is very high quality and so is the hardware provided. Not a single rattle from the table when going over rough roads. I will definitely be adding some more JCR products to my Bronco!
Jimmy D
(Georgia) | March 12th, 2022
Very solid table. Well constructed and no rattling. All parts were included in my package. Installation took a little longer than expected, but in the end I am very happy with the product.
Shane Burkhead
(Florida) | January 28th, 2022
Rubber bumpers were not included in the parts. Disappointing to say the least. The part that should make this rattle free was not included.
Note From JcrOffroad: Sorry about those bumpers missing in the package Shane, please reach out to customer service and we can get them to you ASAP.
