My Cart: 0 item(s)
Bronco Baja Bolt-On Hoop | 6th Gen (2021+)
Designed to add extra protection to your Bronco!
• Easy Bolt-on Installation.
• Works with Ford Modular Bumper only (Does not fit factory plastic or Cabable bumper).
• Will interfere with front camera.
• Hand built in the USA!
*Does not fit Bronco Sport.
Looking for answers to common questions about us or our products? See our FAQ here.
15 Questions asked on Bronco Baja Bolt-On Hoop | 6th Gen (2021+) MOD Steel Bumper
•
Ask us anything
Q
Luke Hoenigsberg • 01/28/2022, 8:49:30 AM
Does the bar interfere with the camera?
A
01/28/2022, 10:59:39 AM
Yes it will. If you have a front camera, you will need our Bronco Front Camera Relocation Bracket.
Q
Landon H. • 02/11/2022, 11:34:30 AM
Does this bumper interfere with the Adaptive Cruise Control Sensors/Lux package?
A
02/11/2022, 3:56:46 PM
The hoop does not interfere with the ACC sensor, no.
Q
ARNALDO • 02/18/2022, 11:02:36 AM
This product you refer to as a hoop is the nudge or bull bar right?
A
02/18/2022, 12:08:29 PM
Correct, the tubework on the bumper.
Q
James • 03/08/2022, 1:20:20 PM
How much space is under the bar? Like from the bottom of the mount to the bottom of the horizontal bar...trying to figure out if my fog lights will fit under this hoop.
Thanks
A
03/11/2022, 4:19:23 PM
Roughly 7".
Q
Brian • 03/08/2022, 9:46:43 PM
What’s the diameter of the pipe?
A
03/09/2022, 9:19:53 AM
1.75"
Q
William • 03/11/2022, 12:40:47 PM
How tall is this from the bumper to the top of the tube?
A
03/11/2022, 4:11:24 PM
Around 9"
Q
David Gogue • 03/13/2022, 6:06:39 PM
Will I be able to use the ford bolts on the steel bumper to attach this hoop.
A
03/16/2022, 3:01:13 PM
Yes, you can use the factory bolts, or the hardware included.
Q
David S • 04/28/2022, 8:58:55 AM
Does this use three or four bolts per side to connect? Your pictures here currently show three, but there's a post on Facebook where there are 4 per side. Old vs. new version?
A
04/28/2022, 2:04:39 PM
There was a post with a photo that was incorrectly labeled as our product. Ours uses three bolts per side.
Q
Cindy • 05/24/2022, 5:28:34 PM
Will this hoop work with the steel modular Ford bumper?
A
05/25/2022, 9:22:48 AM
Yes
Q
Tim Henion • 05/28/2022, 7:13:28 AM
Where is the front camera relocated to and how ?
A
06/06/2022, 2:29:07 PM
If you use our Camera Relocation Bracket, it will relocate it to the fairlead on our front bumper so the camera is not obstructed by a winch or tubework.
Q
Dennis Rose • 07/24/2022, 10:31:44 PM
Will it work with the winch modular bumper kit?
A
08/12/2022, 11:16:12 AM
It will work with our winchplate.
Q
Brian • 09/14/2022, 7:11:27 AM
Will the standard license plate bracket fit under the bar? The height is 7.25”.
A
09/28/2022, 2:53:09 PM
It would be a tight fit with any sort of mount added, but there should be barely enough room.
Q
Barry S Starkman • 09/22/2022, 10:35:16 PM
Does the hoop sit flush against the grill like the Ford Hoop or does it angle away from the grill?
A
09/28/2022, 3:53:59 PM
It is angled forward slightly.
Q
Kyle Dennis • 11/09/2022, 5:26:55 PM
Is there a camera relocation option that works without the winch? Just looking to add the Baja Hoop only. Also, does it entirely block the camera or only partially?
A
11/14/2022, 1:26:56 PM
We don't have a relocation bracket for non-winch applications. It blocks quite a bit of the camera.
Q
Alan • 01/16/2023, 11:52:47 AM
How much distance from top front center of bar to grill?
A
01/20/2023, 5:22:05 PM
Roughly 3"
Currently Viewing Reviews with a rating of 5. Click here to reset.
1
0
0
0
0
Cory Egglefield
(Lake Placid, NY) | April 6th, 2022
I had been looking for a smaller bar for the front bumper that doesn’t go through / block the bronco lettering in the grill - this one was perfect - shipping was fast given current lead times on most products and the foamed protective packaging is amazing! Product arrived pristine and bolted on my modular bumper in seconds with a t40 bit - high quality and good fit - highly recommended.
