My Cart: 0 item(s)
Designed to protect the underside of your Bronco Sport while offroading. Comes coated with a 2 stage satin textured black powdercoat over durable zinc primer finish.
- CNC cut and formed from .120" steel
- Compatible with all Bronco Sport Trim Levels
- Requires removal of factory Badlands evap and gas tank skids.
- Drilling of the pinch weld is required for installation
- No clearance loss from factory felt panels
- Sold in pairs
- Hardware Included
- Made in the USA
- Free shipping!
32 lbs a piece, 64lbs for the pair
In order to run with the factory gas tank skid, the Factory gas tank skid will need to be trimmed
Looking for answers to common questions about us or our products? See our FAQ here.
9 Questions asked on Bronco Sport Evap & Floor Skid | 1st Gen (21+)
•
Ask us anything
Q
Harrison • 12/11/2022, 8:01:30 PM
Does it keep the same ground clearance or does it make it lower?
A
12/13/2022, 3:27:42 PM
The ground clearance stays the same.
Q
Steve • 03/10/2023, 3:17:54 PM
What is your return policy>
A
03/13/2023, 4:49:56 PM
Our policies are located here: https://www.jcroffroad.com/SARP.html
Q
Luke • 06/22/2023, 12:12:50 PM
Does this fit the Badlands Trim?
A
08/04/2023, 10:31:17 AM
Yes, it is compatible on all trim levels.
Q
Curtis Griffin • 07/18/2023, 6:38:09 PM
Can you confirm BSSD-FLEV-1G fitment for Bronco Sport Badlands trim ('21-'23), and what (if any) modification need to be made?
A
08/03/2023, 3:49:50 PM
They are compatible with all trim levels. Install guide and install video can be found on the product page to see how they are installed.
Q
Michael Noland • 11/28/2023, 4:27:04 PM
Do I need to remove the gas tank skid plate in order to install the evap and floor skid? Why don't you label front and back and left & right? Seems easy enough. Why not include directions?
A
11/29/2023, 4:34:52 PM
Install video's and PDF guides are listed directly on the product page below the description.
Q
Dannie • 12/26/2023, 4:07:51 AM
Can I get this item without the skid?
A
01/22/2024, 5:26:35 PM
This product is only the floor/evap skid plates.
Q
Tara Malloy • 01/11/2024, 1:19:04 PM
Is this evap and floor skid compatible with a 2023 Bronco Sport Heritage with a 1.5 L engine?
A
01/17/2024, 10:35:29 AM
Yes.
Q
Macy • 06/11/2024, 11:08:01 AM
The pictures show three skid plates, the front middle, drivers side which covers the EVAP, and the passenger side. Are all three included?
A
06/20/2024, 5:18:50 PM
This product would be the two skid plates on either side, also shown separately on the second to last picture in the photo gallery.
Q
Larry • 08/13/2024, 5:06:25 PM
Will this fit a 21 big bend with a 1.5 l
A
12/20/2024, 5:08:59 PM
Yes, it does.
1
0
0
0
0
Jim scheffer
(WI) | February 9th, 2024
I had damaged the evap canister while doing a bit of off-roading in Sedona. The stock “felt” skid plate had torn when I went over a rock damaging the evap canister. Upon returning home I began searching for metal skid plates and found JC-offroad had what I was looking for. The install was simple enough once you got the holes drilled through the pinch seam as shown on their install video. My advice is start with a small pilot hole and then the step bit, very hard drilling. These skid plates serve the purpose well and I feel much safer doing a little off-roading.
