My Cart: 0 item(s)
Cherokee Rear DIY Bumper - XJ DIY
The DIY kit is designed for those wanting to build their bumper themselves. Let us take the design and guesswork out of the equation! Bend it, weld it, wheel it!
• CNC Cut from 3/16" Steel.
• Fits 2-door and 4-door Jeep Cherokees, 1984-2001.
• Includes receiver hitch tubing.
• Includes mounting provisions for JCR DIY carriers (not included, see related products below).
• Includes JcrOffroad sticker.
• Hand built in the USA!
Looking for answers to common questions about us or our products? See our FAQ here.
13 Questions asked on DIY XJ Bumper | Rear | Jeep Cherokee (84-01)
•
Ask us anything
Q
Devon • 04/09/2020, 1:54:24 PM
Is there a tow weight rating on the receiver or is it intended for recovery only?
A
04/16/2020, 5:17:11 PM
If you plan to tow with this we would suggest adding some reinforcement behind the bumper. Also, we can't really officially rate it since it's a DIY product.
Q
Larkin Kelly • 06/21/2020, 4:04:09 PM
Do these work with the integrated quarter armor?
A
06/24/2020, 5:25:15 PM
They are not designed specifically for the DIY bumpers, but they will often work with modification.
Q
Jesse Nemec • 02/20/2021, 1:05:00 AM
Do you offer any kits to add a swing-out tire carrier into this kit?
A
03/01/2021, 2:33:46 PM
We do not.
Q
Thomas • 05/04/2021, 6:13:15 PM
What are the dimensions?
A
05/05/2021, 2:11:36 PM
Roughly 65" wide x 5" tall.
Q
Jared Wiggin • 05/18/2021, 6:48:11 PM
So I bought this DIY bumper and messed up the mounting brackets by welding then the same way can I just buy a set of mounting brackets?
A
05/21/2021, 11:22:51 AM
Please contact our customer service team.
Q
Rob • 06/05/2021, 2:00:58 PM
Where do I find assembly instructions?
A
06/11/2021, 3:33:39 PM
http://www.jcroffroad.com/install_guides/DIY_XJ_R.pdf
Q
Mike • 06/19/2021, 8:24:11 PM
Will this bumper work with a factory tow receiver hitch?
A
06/25/2021, 11:08:27 AM
You may need to test fit before final weld up and make a couple clearance cuts for the factory hitch, but yes.
Q
Cristopher Valenzuela • 10/05/2021, 9:49:57 PM
Do you guys offer this bumper al ready build ?
A
10/18/2021, 4:22:17 PM
Not this exact bumper. We offer the Rear Vanguard bumper. (Tire carrier-ready)
Q
Doug • 10/25/2021, 7:41:43 PM
Is there a list of hardware needed to install the bumper? Is there anything else required, but not included?
A
10/28/2021, 11:13:00 AM
You can re-use your stock hardware to install.
Q
De'Micheal Ware • 11/24/2021, 7:54:41 PM
Will the swing out tire carrier and Jerry can holder mount to this bumper
A
12/07/2021, 5:28:03 PM
It will not.
Q
Todd • 03/08/2022, 8:54:04 AM
Does this work with the uni-body tie in bracket to add additional support?
A
03/11/2022, 4:19:23 PM
Yes it does.
Q
Alex • 12/16/2022, 11:43:14 AM
I have this bumper. i am in the process of installing the mounts to the bumper. when i measured, i came up with 30 7/8" between the mounts. instructions say 31" should i try moving the mounts out or will that measurement be okay? if i move them out then they start hitting the side wings and mess the angle up.
A
12/20/2022, 2:16:17 PM
30 7/8 is probably fine, but you can always double-check the mount spacing of your specific XJ to be sure.
Q
Luke • 06/25/2024, 1:10:57 AM
Will the plastic covers from I believe the sport fit over this bumper when installed correctly
A
07/08/2024, 5:52:54 PM
The plastic corners will need to be either trimmed or removed to install this bumper.
Currently Viewing Reviews with a rating of 4. Click here to reset.
5
1
2
0
0
Anonymous
| December 31st, 2016
Quality Product. It looks great.
