My Cart: 0 item(s)
The Classic Sliders are tried and true, giving you maximum strength and protection for your Jeep's rocker panels.
• Cut and formed from 2x2x3/16" box tubing.
• 1 3/4" round outer tubing.
• Includes mounting hardware.
• Sold in pairs.
• Gussets act as a step for each door.
• Includes JcrOffroad Sticker.
• Not compatible with body lifts.
• Not compatible with Rubicon Rails.
• Hand built in the USA!
Looking for answers to common questions about us or our products? See our FAQ here.
4 Questions asked on JT Rock Sliders | Classic | Jeep Gladiator JT (2020+)
•
Ask us anything
Q
Joe D'Anna • 07/16/2020, 2:45:36 PM
what are the torque specs for the OEM bolts you mount it with?
A
07/21/2020, 3:41:07 PM
The body mount bolts are 92 ft/lbs
Q
Philip • 11/13/2020, 10:13:29 AM
These are true rock sliders? Nothing to get hung up on underneath? Do you have any detailed pictures of clearance to compare to stock rubi rails?
A
11/16/2020, 10:00:05 AM
They are true rock sliders and much stronger that the Rubi rails. Sorry we don't have any comparison photos at this time.
Q
Ron Ortiz • 11/30/2020, 4:39:11 PM
Do the work in conjunction with the Rubi Rails?
A
12/04/2020, 12:00:43 PM
No, you will have to remove the Rubi rails.
Q
Eddie Ybarra • 10/06/2021, 11:49:57 AM
What is the weight of these rock rails?
A
10/28/2021, 11:13:00 AM
110.0 (lbs)
4
0
1
0
0
Preston Snyder
(Belleville, IL) | December 13th, 2020
I did NOT install these sliders myself. I have a 2020 Rubicon Gladiator. I didn't want to take the risk of breaking the body bolts. I had a local shop install for $100 per side. These sliders are perfectly designed for my Fab Fours Wheels and Tire combo. Full turn radius and does NOT even come close to rubbing. These things are massively sturdy. I use them regularly and I am not a small guy. These have enough of a "step" to use for setting up my overlander tent and to move around the vehicle. I HIGHLY recommend them.
awegw
| October 16th, 2020
waegwaegwea weagwaegwaegwaeg wegwegwegwaeg waegwaeg
William Pettry
(Central Illinois) | October 27th, 2019
Look really good. A problem with the fit on the drivers side. New one sent to us. Some modifications required to passenger side were similar to previous review.
Customer service responsive.
Eric Kramer
(San Diego) | September 5th, 2019
About a 3 week turn around time from order to delivery. Installation wasn’t bad. The passengers side middle body mount flange required some dremel modification of the bolt hole to get clearance for the bolt to go through and line up . The drivers side went much smoother. About 2.5 hours to get both installed.
Chad Williams
(San Diego) | December 18th, 2019
I bought these as I liked the design, and I was looking for an upgrade over the stock rails. They are a significant upgrade, providing a nice step that doesn't sacrifice clearance. I had a little harder time with the install than the video would make it seem, but that seems to be the way it goes. Mounting to the body bolts really anchors them in and they are tough.
My only significant complaint is that they seem to be a bit short - maybe 2 inches short per end. I'm comparing that to the stock Rubicon rails, which cover the entire lower body panel, these leave a small gap in coverage behind the wheels. Maybe with larger tires this is not a big factor, but with stock 33s, it feels vulnerable. I am not sure why this was the conscious design for the rails when the rest of the rail seems so solid.
Note From JcrOffroad: Yes, they are sized for clearance for larger tires without cutting as well as to meet shipping restrictions.
