My Cart: 0 item(s)
Strengthen the Jeep Cherokee XJ Unibody and eliminate the notorious misalignment of your doors and hatch.
Looking for answers to common questions about us or our products? See our FAQ here.
1 Question asked on Jeep Cherokee Frame Stiffener | Rear Unibody | Jeep XJ (84-01)
•
Ask us anything
Q
Michael Kuelske • 09/07/2020, 10:10:49 PM
Just curious as to if this is one individual or both sides.
A
09/09/2020, 1:19:05 PM
Both sides
2
0
0
0
0
Brennen
(MI) | March 4th, 2021
Everything installed great. I wish that the stiffener had more material closer to where the front leaf spring bolts are but besides that, everything lined up with the body well besides a little bit of hammering that is to be expected. Would buy these along with the rest of the kit if I were to do it again.
Anonymous
| April 3rd, 2018
Purchased these to strengthen the rear of my wife's '99 XJ. With 268K miles, it was time to fix some rust and beef up the back end. I turned to my friend Steve, a welder and fabricator for 25+ years. He was impressed with the quality and accuracy of the pieces. Bends are good and holes are accurate for most spots. Keep in mind after 17+ years, your Jeep may not be perfect. Nothing a grinder and hammer could not adjust. We took the opportunity to fix everything that was rusted or worn out. You will need to drop your hitch if you have one. We also pulled the fuel tank for safety reasons. I recommend you also purchase the nut strips to remount the hitch. Wish I saw those when I ordered the stiffiners. Since rust prevention was important, we painted and then ground our weld locations. We also used a seam sealer to keep water out. Time will tell if this works. Overall we are very satisfied with the quality and customer service from JCR. Customers for life.
